Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufacturer which provided the original information in this electronic deliverable. Michco’s only part in this electronic deliverable was the electronic assembly process. You may contact Michco through the following methods: Phone (517) 484-9312 or (800) 331-3339 MI, OH, IN only 2011 N. High St. -- Lansing, Michigan -- 48906 Fax: (517) 484-9836 Email: [email protected] Web site: www.Michco.Com Parts Web site: www.FloorMachineParts.Com Order Parts on Line at: www.FloorMachineParts.Com Directly to Parts & Service: By Email: [email protected] By Fax: (517) 702-2041 By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922 Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners. Manuals are subject to Manufacturer’s reproduction limitations. Originals or reproductions were provided by manufacturers through a request. We make no warranty as to the correctness of information provided in this document and you assume all risk.
Advenger™ BR 600S, 650S, 700S, 800S
PARTS LIST Advance MODELS 56314000(2400D), 56314001(2600D), 56314002(2810D), 56314003(3210D), 56314004(2400C), 56314005(2600C), 56314006(2810C), 56314007(3210C) Nilfisk MODELS 56314010(600S), 56314011(650S)(obs.) 56314012(700S), 56314013(800S), 56314014(600SC), 56314015(650SC)(obs.), 56314016(700SC), 56314017(800SC)
1/03 revised 2/05 FORM NO. 56042438 BOOK E SECTION 13.3.1
03-1
BOOK E E 13.3.1 1
TABLE OF CONTENTS Advenger™ / BR 600S, 650S, 700S, 800S
05-2
DESCRIPTION
PLAN
Chassis System ................................................. E-13.3.1-3 Decal System ................................................... E-13.3.1-5 Drive & Brake Pedal Assemblies .................................... E-13.3.1-7 Electrical Panel Assembly .......................................... E-13.3.1-9 Front Wheel Assembly ............................................E-13.3.1-11 Recovery System ............................................... E-13.3.1-13 Scrub System-Cylindrical ......................................... E-13.3.1-15 Scrub System-Disk .............................................. E-13.3.1-17 Skirt Assemblies-Cylindrical ....................................... E-13.3.1-19 Skirt Assemblies-Disk (Before TSBUS2004-884) ....................... E-13.3.1-21 Skirt Assemblies-Disk (After TSBUS2004-884) ........................ E-13.3.1-23 Solution System ................................................ E-13.3.1-25 Squeegee Assembly ............................................. E-13.3.1-27 Squeegee System............................................... E-13.3.1-29 Steering Column Assembly ........................................ E-13.3.1-31 Optional Light Kits ............................................... E-13.3.1-33 Dual Vac Motor Kit .............................................. E-13.3.1-35 Scrub-N-Vac Tool Kit ............................................. E-13.3.1-37 Vacuum Wand Caddy Kit ......................................... E-13.3.1-39 On-Board Charger Kit ............................................ E-13.3.1-41 Side Broom Kit ................................................. E-13.3.1-43 Optional Deck Kits ............................................ E-13.3.1-44-55 Wiring Diagram ................................................. E-13.3.1-57 Brush Selector Guide-Disk........................................ E-13.3.1-58 Brush Selector Guide-Cylindrical ................................... E-13.3.1-59 Optional Kits And Accessories ..................................... E-13.3.1-60
WHEN ORDERING PARTS *
Use the 8 digit numbers from the “Ref. No.” columns in this parts list.
*
Specify the model and serial number of the machine.
*
Use the space below to record the model and serial number for future reference.
Model
Serial No.
FORM NO. 56042438
BOOK E E 13.3.1 2
FORM NO. 56042438
CHASSIS SYSTEM Advenger™ / BR 600S, 650S, 700S, 800S
03-1 03-7
Item 1 2 3 4 5 6 7 8 9 10 ** 11 12 13 14 15 16 17 18 19 * *
03-1
CHASSIS SYSTEM
04-3
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56001879 56002959 56003412 56003442 56367117 56367206 56412122 56412243 56420160 56314033 56412341 56314092 56314152 56314495 56002084 56314537 56002461 56009122 56009086 56478246 56478246 56477613
Wsh, Flt SAE 1/2 Pin, Cotter Hair Scr, Hex Nyl Loc M12-1.25 x 35mm Scr, Hex Nyl Loc M10-1.50 x 20mm Wsh, Flt .406 x 1.50 x .1875 Bushing Trim Edge Bearing, Ball Bearing, Flange Wheel, 12.00 x 3.50 Wheel Assy, Scrubber Weldment, Chassis Pin, Actuator Linkage, Arm Weldment Nut, Wing 1/4-20 Squeegee Stop Bracket Scr, Hex Thd To Hd 5/16-18 x 4.00 Wsh, Flt .344 x .938 x .125 Nut, Hex Jam 5/16-18 Tie, Cable Tie, Cable Cable Tie
2 1 2 2 2 2 4 4 2 2 2 1 1 1 1 1 1 1 1 1 5 9
BOOK E E 13.3.1 3
* = Not Shown ** = Optional
FORM NO. 56042438
BOOK E E 13.3.1 4
FORM NO. 56042438
DECAL SYSTEM
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-8
Item 1 2 3 4 5 6 7 8
9 10 11 12 13
03-1
DECAL SYSTEM
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56014601 56016348 56015179 56015168 56016401 56016402 56015445 56016403 56016405 56016404 56016406 56016671 56016452 56016672 56016453 56016673 56016454 56016674 56016421 56016667 56014450 56016407 56016455 56314876
Decal, Caution Decal, Logo Decal, Emergency Decal, Battery Wiring Decal, Parking Brake Decal, Solution Flow (before TSBUS2004-874) Decal, Solution Flow (after TSBUS2004-874) Decal, Circuit Breaker Decal, Advenger NOTE 1 Decal, Advenger NOTE 2 Decal, Nilfisk BR600S NOTE 1 Decal, Nilfisk BR600S NOTE 2 Decal, Nilfisk BR650S NOTE 1 Decal, Nilfisk BR650S NOTE 2 Decal, Nilfisk BR700S NOTE 1 Decal, Nilfisk BR700S NOTE 2 Decal, Nilfisk BR800S NOTE 1 Decal, Nilfisk BR800S NOTE 2 Decal, Logo 2 Inch Decal, Ladder Diagram Decal, Patent Number Decal, Smart Solutions (Advance model) NOTE 1 Decal, ECO Solutions (Nilfisk models) NOTE 1 Floor Mat (Nilfisk only after Sept. 2004)
1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1
BOOK E E 13.3.1 5
NOTE 1: Used on machines built after serial number chart (ECO Solution & Smart Solution implemented). NOTE 2: Used on machines built before serial number chart.
NOTE 1 & 2 SERIAL NUMBER CHART 1750239 - Advenger™ 2400D 1757986 - Advenger™ 2810D 1757999 - Advenger™ 3210D 1759162 - Advenger™ 2400C 1750252 - Advenger™ 2600C 1758000 - Advenger™ 2810C 1758002 - Advenger™ 3210C 1752024 - BR 600S 1752041 - BR 700S 1752046 - BR 800S 1752052 - BR 600CS 1752054 - BR 700CS 1753522 - BR 800CS
FORM NO. 56042438
BOOK E E 13.3.1 6
FORM NO. 56042438
DRIVE & BRAKE PEDAL ASSEMBLIES
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
03-7
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
03-1
DRIVE & BRAKE PEDAL ASSEMBLIES
03-7
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56002733 56002768 56003358 56003403 56003428 56009030 56009060 56324505 56368989 56409378 56409471 56409610 56412094 56454740 56314037 56314038 56314039 56314121 56314122 56314138 56314176 56314463 56412331 56756318 56002098 56003119 56314561 56003174
Scr, Pan Phil 10-24 x .88 Nut, Hex Nyl Loc 10-24 Scr, Hex M6-1.00 x 25mm Nut, Hex Nyl Loc M6-1.00 Scr, Hex M6-1.00 x 75mm Scr, Pan Phil Thd Form 10-24 x .38 Wsh, Flt SS .260 x 1.000 x .074 Bearing, Flange Bushing Spacer, Nylon Lever, Throttle Link Weldment Housing, Potentiometer Potentiometer, 5K (R1) Spring, Torsion Bracket, Foot Pedal Foot Pedal Bracket, Brake Lock, Brake Mat, Pedal Mat, Pedal Pedal Weldment Wire Assy. Bearing, Flange Wsh, Flt SAE 1/4 Scr, Pan Phil SS 1/4-20 x .50 Bushing Scr, Hex Thd to Hd M6-1.0 x 16mm
1 1 1 6 4 2 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 6 7 1 1
BOOK E E 13.3.1 7
FORM NO. 56042438
BOOK E E 13.3.1 8
FORM NO. 56042438
ELECTRICAL PANEL ASSEMBLY
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
03-7
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
03-1
ELECTRICAL PANEL ASSEMBLY
03-7
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56002192 56003119 56002462 56002561 56009020 56002098 56387316 56395450 56407193 56412089 56412177 56459367 56459369 56469858 56314065 56314067 56314068 56364294 56407169 56395450 56009051
Scr, Pan Phil 10-24 x .75 Scr, Pan Phil SS 1/4-20 x .50 Scr, Pan Phil 1/4-20 x .38 Nut, Hex W/SHPRF 1/4-20 Stud Wsh, Flt SAE 1/4 Circuit Breaker, 10 Amp (Control Circuit / F3) Contactor (Brush Drive / K1) Gasket Fuse, 150 Amp (F1) Horn / Backup Alarm (H1) Boot, Reset Button Boot, Reset Button Standoff, Insulated Cover, Electrical Controller (A1) Electrical Panel Circuit Breaker, 45 Amp (Wheel Drive / F2) Gasket Contactor (Vacuum System / K2) Scr, Pan Phil Thd Form 8-32 x .38
2 6 7 3 3 6 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1
BOOK E E 13.3.1 9
FORM NO. 56042438
BOOK E E 13.3.1 10
FORM NO. 56042438
FRONT WHEEL ASSEMBLY
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
03-7
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 * * * * * * * * * * ** 18 19 20 21 22 23 24 25
03-1
FRONT WHEEL ASSEMBLY
04-9
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56002158 56002826 56003040 56003273 56003274 56009122 56158143 56158151 56171081 56378380 56481699 56003220 56003263 56314032 56314116 56314157 56314268 56314282 56314289 56412320 56412321 56412322 56412323 56412325 56314291 56314370 56314269 56412339 56314278 56314283 56314085 56305317 56003653 56003659 56009293 56002006
Scr, Soc Hd 5/16-18 x .88 Nut, Hex Nyl Loc-Thin 5/16-18 Scr, Hex Hd Loc 3/8-16 x .62 Scr, Soc Hd M8-1.25 x 70mm Scr, Soc Hd M8-1.25 x 55mm Wsh, Flt .344 x .938 x .125 Bearing Cup Bearing Cone Seal, Shaft Bearing, Ball Spring Nut, Hex Nyl Loc-Thin 1-14 UNF Rivet, Nylon Tree Push-In Block, Bearing Plate, Steering Rod, Brake Motor / Drive Wheel Assy (M3) TSBUS2004-869 Brake Lever Weldment Brake Band Carbon Brush Cover Kit (contains 4 seal rings & 4 brush covers) Sealing Ring Bearing, Ball, Gearbox Side Bearing, Ball, Brush Side Carbon Brush Kit Brake Bar Spacer Block Drive Wheel – P7 Scrubber Compound Drive Wheel – Polyurethane Plate, Splash Guard Splash Guard Spindle Weldment Clamp, P Scr, Pan Phil M4 x 8 Scr, Button Soc SS 10-24 x .75 Nut, Hex Machine SS 10-24 Wsh, Flt SAE #6
1 1 4 4 4 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1
BOOK E E 13.3.1 11
* = Not Shown ** = Optional
FORM NO. 56042438
BOOK E E 13.3.1 12
FORM NO. 56042438
RECOVERY SYSTEM
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-3
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 * 38 39 40 41 42 43 44 *
03-1
RECOVERY SYSTEM
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56002043 56002098 56002108 56002793 56002896 56314115 56324497 56314704 56391690 56407361 56314760 56440213 56212236 56314036 56314098 56314099 56314100 56314101 56314103 56314749 56391807 56314201 56314203 56314220 56314706 56314371 56314372 56314373 56314376 56314461 56314484 56314487 56314488 56314491 56314533 56458457 56397228 56212223 56314400 56009191 56314509 56385564 56002507 56314705 56477613 56314251
Scr, Pan Phil 10-24 x .38 Wsh, Flt SAE 1/4 Scr, Pan Phil 1/4-20 x 2.00 Scr, Pan Phil 5/16-18 x .75 Scr, Pan Phil SS 10-24 x .62 Pin, Cover Pivot Cage, Float Gasket Ball, Float Clamp, Plastic Gasket, Vacuum Duct Clamp, Hose SAE #32 Clamp, Plastic Tank, Recovery Foam Cylinder Gasket Muffler, Top Panel Muffler, Bottom Panel Gasket Cover, Exhaust NOTE 1 Foam Acoustical NOTE 2 Cover, Vac Motor Lid, Recovery Tank Mount Bracket Foam, Sound NOTE 2 Gasket Screen, Filter Filter Plate, Separator Lid, Vac Filter Mount, Vibration Drainhose Muffler, Vac Gasket Vac Hose Assy Hose, Vac 2.00 x 6.0 x 975018 NOTE 2 Motor, Vac 36VDC (M5) Carbon Brush Set Wire Rope, 9 Inch Scr, Pan Phil Plastite 10-14 x .50 Spring Clamp, P Scr, Pan Phil 1/4-20 x .75 Foam, Sound NOTE 2 Tie, Cable NOTE 2 Harness Vac
8 7 6 1 5 1 2 1 1 1 1 3 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 2 1 1 4 1 1 1
BOOK E E 13.3.1 13
* = Not Shown NOTE 1: 56314749 replaces previous parts 56314199 and 56314200 after serial number chart. NOTE 2: Used on machines built after serial number chart. NOTE 1 & 2 SERIAL NUMBER CHART 1750239 - Advenger™ 2400D 1757986 - Advenger™ 2810D 1757999 - Advenger™ 3210D 1759162 - Advenger™ 2400C 1750252 - Advenger™ 2600C 1758000 - Advenger™ 2810C 1758002 - Advenger™ 3210C 1752024 - BR 600S 1752041 - BR 700S 1752046 - BR 800S 1752052 - BR 600CS 1752054 - BR 700CS 1753522 - BR 800CS
FORM NO. 56042438
BOOK E E 13.3.1 14
FORM NO. 56042438
SCRUB SYSTEM-CYLINDRICAL
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
03-7
Item
03-1
SCRUB SYSTEM-CYLINDRICAL
04-7
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 * * * 29 30 31
56001841 56001861 56001879 56002063 56002086 56002484 56002561 56002843 56002849 56002948 56002959 56002987 56003403 56003406 56003426 56003431 56003491 56003492 56003671 56009019 56009020 56009062 56009086 56152811 56262549 56328064 56330391 56393303 56470433 56393790 56388520 56401783 56407391 56407431
2 2 2 4 4 2 2 4 2 6 4 2 1 2 8 2 2 1 2 2 2 4 4 2 1 2 2 1 1 2 1 2 2 2
* * * * * 32 33 34 35 36 37 38
56417489 56407490 56407492 56407493 56407494 56407432 56407433 56407434 56407435 56407465 56407466 56412071
1 1 1 4 4 2 2 1 1 1 1 1
Scr, Soc Set Loc 1/4-20 x .25 Scr, Hex Hd 1/4-20 x .38 Wsh, Flt SAE 1/2 Wsh, Flt SAE 3/8 Scr, Soc Set Loc 5/16-18 x .25 Scr, Hex Hd 1/2-13 x 4.50 Nut, Hex W/SHPRF 1/4-20 Nut, Hex Nyl Loc-Thin 1/2-13 Nut, Hex Nyl Loc-Thin SS 10-24 Scr, Hex Hd Loc 1/4-20 x .75 Pin, Cotter Hair Scr, Hex Hd SS 10-24 x .50 Nut, Hex Nyl Loc M6-1.00 Nut, Hex Nyl Loc M10-1.50 Nut, Hex Nyl Loc SS M6-1.00 Scr, Hex Hd SS M6-1.00 x 16mm Scr, Hex M10-1.50 x 40mm Scr, Hex M6-1.00 x 95mm Pin, Ring .50 x 1.25 Scr, Hex Thd Form 1/4-20 x .38 Stud Scr, Pan Phil Thd Form 1/4-20 x .50 Nut, Hex Jam 5/16-18 Collar Tee, Barb Clamp, P Wire Rope, 12” Lift Actuator, Brush (M1) Carbon Brush Kit Limit Switch Plastic Nut Leveler Blade Motor, 36VDC, .75HP (M7 / M8) TSBUS2004-868 Armature Bearing Brush Cap Assy Carbon Brush Assy Brush Cover Cap Idler, Belt Sheave, Poly-V Guard, Right Belt Guard, Left Belt Belt, Poly-V 180J6 Belt, Poly-V 190J6 Compression Spring
Item 39 40 41 42 43 44 45 46 47 48 49 50
51
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73
BOOK E E 13.3.1 15
Ref. No. Qty
Description
56412176 56412262 56420018 56420019 56420020 56469858 56493357 56003211 56003603
1 1 1 1 1 2 2 6 8
56409462 56314088 56314087 56314086 56314089 56314226 56314232 56397442 56397443 56314254 56314294 56314310 56314436 56314443 56314444 56314445 56407559 56412459 56106070 56407303 56314442 56407551 56407558 56002119 56003237 56106070 56407389 56407442 56407556 56407557 56407558
1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2 1 1 1 1 1 1 2 1 2 1 1 1 1 1
Bushing Housing, Spring Compression Spring Nut Retainer Nut Retainer Standoff, Insulated Insulator, Terminal Scr, Hex Hd SS M6-1.00 x 12mm Scr, Pan Phil Thd Form 1/4-20 x .38mm Serial Plate Tube, Solution, Main Housing Weld’t, 24” TSBUS2003-854 Housing Weld’t, 26” TSBUS2003-854 Housing Weld’t, 28” TSBUS2003-854 Housing Weld’t, 32” TSBUS2003-854 Hopper Weld’t, 24” Hopper Weld’t, 26” Hopper Weld’t, 28” Hopper Weld’t, 32” Harness, Brush Motor (Not Shown) Pin, Hitch Cotterless Coupling, Quick Disconnect, Male Strap Left Skirt Assy Right Skirt Assy Idler End Assy (#61-65) Drive End Assy (#66-73) Wheel Bearing, Ball Knob Idler Bearing Plate Weld’t. Hub Washer, Bearing Scr, Soc Set Loc 1/4-20 x .50 Key, Sq. .19 x .62 Bearing, Ball Spacer Sheave, Poly-V Bearing Plate Weld’t. Spindle Washer, Bearing
* = Not Shown
NOTE: See “BRUSH SELECTOR GUIDE” at back of manual for available scrub brushes.
FORM NO. 56042438
BOOK E E 13.3.1 16
FORM NO. 56042438
SCRUB SYSTEM-DISK
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
03-10
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 * * * 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
* * * * * * * *
03-1
SCRUB SYSTEM-DISK
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56002938 56003246 56003335 56003405 56003426 56003431 56003443 56003477 56003671 56009019 56009030 56009057 56009062 56009086 56009096 56249280 56366455 56366463 56385564 56393303 56470433 56393790 56388520 56407053 56407114 56314030 56407334 56412071 56412262 56420018 56420019 56420020 56003211 56003263 56003639 56003657 56003658 56412189 56249682 56262180 56314053 56314081 56314090 56314137 56314342 56314139 56314140 56314141 56314335 56314359 56314499 56314560 56314580 56314581 56314582 56314583 56314584
Wsh, Flt SAE SS 5/16 Key, Sq .25 x 1.62 Scr, Hex Loc SS 5/16-18 x .88 Nut, Hex Nyl Loc SS M8-1.25 Nut, Hex Nyl Loc SS M6-1.00 (qty 8 on 24” & 32”) Scr, Hex Hd SS M6-1.00 x 16mm Scr, Hex Hd SS M6-1.00 x 20mm Scr, Hex Loc SS M8-1.25 x 25mm Pin, Ring .50 x 1.25 Scr, Hex Thd Form 1/4-20 x .38 Scr, Pan Phil Thd Form 10-24 x .38 Wsh, Flt Harden .344 x 1.000 x .120/.135 Scr, Pan Phil Thd Form 1/4-20 x .50 Nut, Hex Jam 5/16-18 Wsh, Flt .193 x .875 x .060 Tee, Barb Plate, Stop Spring Retainer Clamp, P Lift Actuator, Brush (M1) Carbon Brush Kit Limit Switch Plastic Nut Thermoid Disk Knob Brush Holder Knob Compression Spring Housing, Spring Compression Spring Nut Retainer Nut Retainer Scr, Hex Hd SS M6-1.00 x 12mm Rivet, Nylon Tree Push-In Scr, Hex Hd SS M8-1.25 x 30mm Nut, Hex Jam M12-1.75 Scr, Hex Thd To Hd SS M12-1.75 x 70mm Hose, Spriral .375 Tube, Solution Tube, Spiral .375 Bracket, Motor Weld’t, Disk Deck (24”, 26”, 28”) Weld’t, Disk Deck (32”) Blade, Rear (24”, 26”, 28”) Blade, Rear (32”) Motor Gearbox Assy (24” / M7) Motor Gearbox Assy (26” / M7) Motor Gearbox Assy (28” / M7) Motor Gearbox Assy (32” / M7) Key, 6mm Square Cover, Gearbox Gearbox Bearing (Fan End) Bearing (Brush End) Brush Ring Carbon Brush Safety Hook
18 2 4 6 12 8 4 6 2 2 6 4 4 4 2 2 2 2 2 1 1 2 1 4 4 2 4 1 1 1 1 1 16 18 6 4 4 1 1 1 2 1 1 1 1 1 1 1 1 2 2 2 1 1 1 4 1
Item
BOOK E E 13.3.1 17
Ref. No. Qty
Description
51 52 53 54 55 56 57 58
56314218 56314261 56314272 56314294 56314310 56314349 56314885 56314347 56314894 56314350 56314884 56314359 56314362 56314363 56314146 56314343 56314499 56392277 56314031 56397300 56401783 56412187 56002768 56002959
2 2 2 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 2 1 2 2 2 2
Shaft, Hub Mount Skirt Bracket, Forward (26” & 28” only) Barbed Elbow, 90 Pin, Hitch Cotterless Coupling, Quick Disconnect, Male Skirt Assy, Left (24”, 26”, 28” / before TSBUS2004-884) Skirt Assy, Left (24”, 26”, 28” / after TSBUS2004-884) Skirt Assy, Left (32” / before TSBUS2004-884) Skirt Assy, Left (32” / after TSBUS2004-884) Skirt Assy, Right (All Models / before TSBUS2004-884) Skirt Assy, Right (All Models / after TSBUS2004-884) Key, 6mm Sq. Blade, Forward (24”) Blade, Forward (26”) Blade, Forward (28”) Blade, Forward (32”) Cover, Gearbox Tube, Solution Hub, Drive Tee, Barb Leg Leveler, 5/16-18 Hose, Spiral .375 Nut, Hex Nyl Loc 10-24 Pin, Cotter Hair
** ** **
56314124 56314170 56314395
1 1 1
** ** **
56314125 56314171 56314396
1 1 1
** ** **
56314126 56314172 56314397
1 1 1
** ** **
56314127 56314173 56314398
1 1 1
** **
56314911 56314915
1 1
** **
56314912 56314916
1 1
** **
56314913 56314917
1 1
** **
56314914 56314918
1 1
42 43 44 45 46 47
48 49 50
24” Disk Deck Blade Kits (before TSBUS2004-884) Kit, Gum Rubber 24 Disk NOTE 2 Kit, Neoprene 24 Disk NOTE 2 Kit, Linatex 24 Disk NOTE 2 26” Disk Deck Blade Kits (before TSBUS2004-884) Kit, Gum Rubber 26 Disk NOTE 2 Kit, Neoprene 26 Disk NOTE 2 Kit, Linatex 26 Disk NOTE 2 28” Disk Deck Blade Kits (before TSBUS2004-884) Kit, Gum Rubber 28 Disk NOTE 2 Kit, Neoprene 28 Disk NOTE 2 Kit, Linatex 28 Disk NOTE 2 32” Disk Deck Blade Kits (before TSBUS2004-884) Kit, Gum Rubber 32 Disk NOTE 2 Kit, Neoprene 32 Disk NOTE 2 Kit, Linatex 32 Disk NOTE 2 24” Disk Deck Blade Kits (after TSBUS2004-884) Kit, Gum Rubber 24 Disk NOTE 2 Kit, Linatex 24 Disk NOTE 2 26” Disk Deck Blade Kits (after TSBUS2004-884) Kit, Gum Rubber 26 Disk NOTE 2 Kit, Linatex 26 Disk NOTE 2 28” Disk Deck Blade Kits (after TSBUS2004-884) Kit, Gum Rubber 28 Disk NOTE 2 Kit, Linatex 28 Disk NOTE 2 32” Disk Deck Blade Kits (after TSBUS2004-884) Kit, Gum Rubber 32 Disk NOTE 2 Kit, Linatex 32 Disk NOTE 2
* = Not Shown ** = Optional
NOTE: See “BRUSH SELECTOR GUIDE” at back of manual for available scrub brushes. NOTE 2: Disk Deck Blade Kits include the required mounting fasteners (Rivet, Nylon Tree Push-In 56003263) and both deck and skirt assembly blades.
FORM NO. 56042438
BOOK E E 13.3.1 18
SKIRT ASSEMBLIES-CYLINDRICAL Advenger™ / BR 600S, 650S, 700S, 800S
LEFT SKIRT ASSEMBLY SHOWN
FORM NO. 56042438
03-1
Item
1 2 3 4 5 6 7 8 9 10 ** ** 11 12 13 14 15
03-1
SKIRT ASSEMBLIES-CYLINDRICAL
04-3
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56314443 56314444 56001939 56003178 56003179 56003389 56003426 56003431 56003441 56185263 56320595 56407447 56407392 56410335 56470672 56314435 56314437 56314439 56314438 56314440 56314441
Left Skirt Assembly Right Skirt Assembly Wsh, Flt SAE 5/16 Scr, Hex M8-1.25 x 16mm Scr, Hex Thd To Hd M8-1.25 x 20mm Nut, Hex Nyl Loc M8-1.25 Nut, Hex Nyl Loc SS M6-1.00 Scr, Hex Hd SS M6-1.00 x 16mm Scr, Hex Nyl Loc M6-1.00 x 15mm Bearing, Sleeve Bushing, .32 x .50 x .28 Skirt, Gum Rubber Skirt, Neoprene Skirt Spring, Extension Arm, Mount Retainer, Skirt Skirt Bracket Weld’t, Left Skirt Bracket Weld’t, Right Bracket, Mount, Left Bracket, Mount, Right
1 1 2 1 1 1 5 6 1 2 2 1 1 1 1 1 1 1 1 1 1
BOOK E E 13.3.1 19
** = Optional NOTE: All quantities are for one skirt assembly only, there are two skirt assemblies on the machine.
FORM NO. 56042438
BOOK E E 13.3.1 20
FORM NO. 56042438
SKIRT ASSEMBLIES-DISK (BEFORE TSBUS2004-884)
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-12
Item
03-1
SKIRT ASSEMBLIES-DISK (BEFORE TSBUS2004-884)
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
9 10 11
56314347 56314349 56314350 56002098 56003167 56009045 56003426 56003454 56324499 56471220 56314058 56314059 56314340 56314341 56016163
1 1 1 2 1 2 8 7 1 1 1 1 1 1 1
Left Skirt Assembly (32”) Left Skirt Assembly (24”, 26”, 28”) Right Skirt Assembly (All Models) Wsh, Flt SAE 1/4 NOTE 1 Scr, Hex M6-1.00 x 40mm NOTE 1 Wsh, Bowed .375 x .578 x .060 NOTE 1 Nut, Hex Nyl Loc SS M6-1.00 Scr, Hex Thd to Hd SS M6-1.00 x 20mm Wheel, 3.00 NOTE 1 Bushing NOTE 1 Frame, Skirt LH Frame, Skirt RH Blade, Gum Rubber Retainer, Blade Decal, No Step (Right Skirt Assembly only)
** ** **
56314124 56314170 56314395
1 1 1
** ** **
56314125 56314171 56314396
1 1 1
** ** **
56314126 56314172 56314397
1 1 1
** ** **
56314127 56314173 56314398
1 1 1
1 2 3 4 5 6 7 8
BOOK E E 13.3.1 21
24” Disk Deck Blade Kits Kit, Gum Rubber 24 Disk NOTE 3 Kit, Neoprene 24 Disk NOTE 3 Kit, Linatex 24 Disk NOTE 3 26” Disk Deck Blade Kits Kit, Gum Rubber 26 Disk NOTE 3 Kit, Neoprene 26 Disk NOTE 3 Kit, Linatex 26 Disk NOTE 3 28” Disk Deck Blade Kits Kit, Gum Rubber 28 Disk NOTE 3 Kit, Neoprene 28 Disk NOTE 3 Kit, Linatex 28 Disk NOTE 3 32” Disk Deck Blade Kits Kit, Gum Rubber 32 Disk NOTE 3 Kit, Neoprene 32 Disk NOTE 3 Kit, Linatex 32 Disk NOTE 3
** = Optional
NOTE 1: These items are on the Right Skirt Assembly PN 56314350 on all models, but only on the 32” Left Skirt Assembly PN56314347. NOTE 2: All quantities are for one skirt assembly only, there are two skirt assemblies on the machine. NOTE 3: Disk Deck Blade Kits include the required mounting fasteners (Rivet, Nylon Tree Push-In 56003263) and both deck and skirt assembly blades.
FORM NO. 56042438
BOOK E E 13.3.1 22
FORM NO. 56042438
SKIRT ASSEMBLIES-DISK (AFTER TSBUS2004-884)
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-12
Item
03-1
SKIRT ASSEMBLIES-DISK (AFTER TSBUS2004-884)
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
1 2 3 4 5 6 7 8 9 10 11 ** 12 ** 13 14 15
56314894 56314885 56314884 56324499 56016163 56471220 56002098 56003167 56003426 56003454 56003695 56003696 56009045 56314340 56314547 56314883 56314895 56314886 56314887 56314891
1 1 1 1 1 1 2 1 9 2 6 2 2 1 1 1 1 1 1 1
Left Skirt Assembly (32”) Left Skirt Assembly (24”, 26”, 28”) Right Skirt Assembly (All Models) Wheel 3.00 NOTE 1 Decal, No Step (Right Skirt Assembly Only) Bushing NOTE 1 Wsh, Flt Sae 1/4 NOTE 1 Scr,Hex M6-1.0x40mm NOTE 1 Nut, Hex Nyl Loc Ss M6x1.0 (qty of 8 on 56314885) Scr Hex Thd To Hd Ss M6-1.0 X 20mm Scr Hex Thd To Hd Ss M6-1.0 X 25mm Wsh, Flt Ss .33 X 1.00 X.060 Wsh, Bowed .375x.578x.060 NOTE 1 Blade, Gum Rubber Blade, Linatex Blade, Gum Rubber Inside Blade, Linatex Inside Frame, Skirt Rh Frame, Skirt Lh Retainer, Blade
** **
56314911 56314915
1 1
** **
56314912 56314916
1 1
** **
56314913 56314917
1 1
** **
56314914 56314918
1 1
BOOK E E 13.3.1 23
24” Disk Deck Blade Kits Kit, Gum Rubber 24 Disk NOTE 3 Kit, Linatex 24 Disk NOTE 3 26” Disk Deck Blade Kits Kit, Gum Rubber 26 Disk NOTE 3 Kit, Linatex 26 Disk NOTE 3 28” Disk Deck Blade Kits Kit, Gum Rubber 28 Disk NOTE 3 Kit, Linatex 28 Disk NOTE 3 32” Disk Deck Blade Kits Kit, Gum Rubber 32 Disk NOTE 3 Kit, Linatex 32 Disk NOTE 3
** = Optional
NOTE 1: These items are on the Right Skirt Assembly PN 56314884 on all models, but only on the 32” Left Skirt Assembly PN56314894. NOTE 2: All quantities are for one skirt assembly only, there are two skirt assemblies on the machine. NOTE 3: Disk Deck Blade Kits include the required mounting fasteners (Rivet, Nylon Tree Push-In 56003263) and both deck and skirt assembly blades.
FORM NO. 56042438
BOOK E E 13.3.1 24
FORM NO. 56042438
SOLUTION SYSTEM
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-3
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 *
03-1
SOLUTION SYSTEM
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56001939 56001954 56009206 56002035 56002043 56002066 56002098 56002108 56002507 56002589 56002674 56002171 56002793 56002826 56002830 56002840 56002900 56002997 56003179 56003178 56003268 56003389 56009002 56009122 56009205 56219932 56255076 56344265 56368776 56372673 56409152 56314757 56412196 56412273 56900273 56468553 56469380 56478246 56003003 56046309 56050872 56314899 56262180 56314035 56409613
Wsh, Flt SAE 5/16 Wsh, Flt SAE #10 Scr, Truss Phil-Blk 10-24 x .50 Scr, Hex Hd 5/16-18 x .62 Scr, Pan Phil 10-24 x .38 Scr, Pan Phil 1/4-20 x .62 Wsh, Flt SAE 1/4 Scr, Pan Phil 1/4-20 x 2.00 Scr, Pan Phil 1/4-20 x .75 Scr, Hex Hd 6-32 x .50 Scr, Pan Phil 10-24 x 1.00 Scr, Pan Phil 10-24 x 2.00 Scr, Pan Phil 5/16-18 x .75 Nut, Hex Nyl Loc-Thin 5/16-18 Nut, Hex Nyl Loc 6-32 Nut, Hex Nyl Loc-Thin 1/4-20 Scr, Pan Phil SS 10-24 x .50 Scr, Pan Phil 1/4-20 x 1.75 Scr, Hex Thd to Hd M8-1.25 x 20mm Scr, Hex M8-1.25 x 16mm Ring, Ret Ext Type E Reinf. .25 Dia. Nut, Hex Nyl Loc M8-1.25 Wsh, Flt .266 x .906 x .060 Wsh, Flt .344 x .938 x .125 Wsh, Flt SS #10 Clamp, Hose SAE #6 Cap, Pipe GHT Nylon Clamp, Cable Washer, Rubber Boot, Battery Post Barb, 90 Elbow, 1/2 x 1/2NPT NOTE 3 Barb, 90 Elbow 3/4 x 1/2NPT NOTE 4 Hinge Barb, Adapter, 1/2 x 3/4GHT NOTE 3 Barb NOTE 4 Bushing, .27 x .37 x 1.30 Clamp, P Tie, Cable Scr, Pan Phil 5/16-18 x .62 Spacer, Phenolic Spacer, Phenolic Valve, Ball Hose, Spiral .50ID x 7.00 Seat Switch, Seat (S2)
4 3 4 4 3 3 11 1 2 1 5 4 2 1 1 3 5 3 4 3 3 3 2 4 4 4 1 1 1 2 1 1 1 1 1 1 1 2 1 2 1 1 1 1 1
Item 43 44 45 46 * * 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 *
BOOK E E 13.3.1 25
Ref. No. Qty
Description
56314049 56314066 56314069 56314072 56396188 56396189 56314153 56314758 56314759 56314882 56314155 56314608 56314213 56314292 56314220 56314221 56314223 56314250 56314253 56314264 56314311 56314401 56314881 56314532 56314538 56314756 56386182 56397189 56397215 56397508 56264318 56263218 56442003 56314339
1 1 1 1 1 1 1 1 1 1 5 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
56456460 56478246 56372673 56441600 56001993 56314755 56112771 56219932 56410162 56262180 56314119
4 10 10 1 2 1 4 4 1 1 1
Solution Tank Cover, Solution Tank, Assy Gasket Control Panel Assembly Switch, Key Key, Spare Tee NOTE 3 Tee, Barb NOTE 4 Bracket, Valve (Before TSBUS2004-874) Bracket, Valve (After TSBUS2004-874) Clamp, Cable Clamp, Cable Cover, Actuator Bar, Disconnect Tank Mount Bracket Weld’t, Seat Mount NOTE 2 Prop Rod Harness, Main (Not Shown) TSBUS2004-869 Charge Connector Assy Hinge Bracket Coupling, Quick Disconnect Female Bracket, Water Valve (Before TSBUS2004-874) Bracket, Water Valve (After TSBUS2004-874) Panel, Battery Box Strainer NOTE 3 Strainer NOTE 4 Hose, Spiral .50ID x 26.00 Spacer Solenoid Valve Assy, 36V (L1) Charge Connector Assy Hose, Spiral .500 NOTE 3 Hose, .75 Clear PVC NOTE 4 Clamp, P Kit, Battery Connector (includes items 70-73) (Advance Models only) NOTE 1 Cable, Battery Tie, Cable Boot, Battery Post Cable, Battery Scr, Pan Phil 10-24 x .50 NOTE 4 Valve, Solution NOTE 4 Clamp, Hose SAE #10 NOTE 4 Clamp, Hose SAE #6 NOTE 3 Hose, Spiral .75 ID x 7.00 NOTE 4 Hose, Spiral .50 ID x 7.00 NOTE 3 Battery Spacer (Advance Models only)
* = Not Shown NOTE 1: For Advance models “Battery Connector Kit” (56314339) is included with machine. For Nilfisk models battery cables are not included (after SN 1688856), but “Battery Connector Kit” (56314326) can be ordered separately if battery connectors are desired. NOTE 2: Seat Weldment 56314221 was modified as of serial #1726172 to accommodate Onboard Charger Kit 56314753. NOTE 3: Used on machines built before serial number chart. NOTE 4: Used on machines built after serial number chart.
NOTE 3 & 4 SERIAL NUMBER CHART 1750239 - Advenger™ 2400D 1757986 - Advenger™ 2810D 1757999 - Advenger™ 3210D 1759162 - Advenger™ 2400C 1750252 - Advenger™ 2600C 1758000 - Advenger™ 2810C 1758002 - Advenger™ 3210C 1752024 - BR 600S 1752041 - BR 700S 1752046 - BR 800S 1752052 - BR 600SC 1752054 - BR 700SC 1753522 - BR 800SC
FORM NO. 56042438
BOOK E E 13.3.1 26
FORM NO. 56042438
SQUEEGEE ASSEMBLY
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-3
Item
03-1
SQUEEGEE ASSEMBLY
04-5
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56314327 56314020 56314358 56003666 56002851 56002909 56002938 56002907 56009111 56324350 56370711 56471194 56003472 56314317 56314026 56314323 56314318 56314027 56314324 56314316 56314028 56314322 56314054 56314303 56314060 56314319 56314271 56314325
1 1 1 2 2 2 2 2 4 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Squeegee Assy (24”) Squeegee Assy (26” & 28”) Squeegee Assy (32”) Scr, Hex Hd SS 5/16-18 x 2.75 Nut, Hex Nyl Loc-Thin SS 5/16-18 Scr, Pan Phil SS 6-32 x .38 Wsh, Flt SAE SS 5/16 Nut, Hex Nyl Loc SS 6-32 Nut, Wing SS 1/4-20 Wheel Nut, Thumb Latch Assy Scr, Soc Shd .38 x 1.00 x 5/16-18 Strap, Left Rear (24”) Strap, Left Rear (26” & 28”) Strap, Left Rear (32”) Strap, Right Rear (24”) Strap, Right Rear (26” & 28”) Strap, Right Rear (32”) Strap, Front (24”) Strap, Front (26” & 28”) Strap, Front (32”) Kit, Standard Squeegee Blade (24”) NOTE #1 Kit, Standard Squeegee Blade (26” & 28”) NOTE #1 Kit, Standard Squeegee Blade (32”) NOTE #1 Squeegee Tool, Cast (24”) Squeegee Tool, Cast (26” & 28”) Squeegee Tool, Cast (32”)
** **
56314055 56314056
1 1
** **
56314304 56314305
1 1
** **
56314061 56314062
1 1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
BOOK E E 13.3.1 27
24” Squeegee Blade Kits Kit, Linatex Squeegee Blade NOTE #1 Kit, Neoprene Squeegee Blade NOTE #1 26” & 28” Squeegee Blade Kits Kit, Linatex Squeegee Blade NOTE #1 Kit, Neoprene Squeegee Blade NOTE #1 32” Squeegee Blade Kits Kit, Linatex Squeegee Blade NOTE #1 Kit, Neoprene Squeegee Blade NOTE #1
** = Optional, Not Included NOTE #1: All squeegee blade kits include both front and rear squeegee blades.
FORM NO. 56042438
BOOK E E 13.3.1 28
FORM NO. 56042438
SQUEEGEE SYSTEM
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
03-7
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
03-1
SQUEEGEE SYSTEM
05-2
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 29
Ref. No. Qty
Description
56001884 56002082 56002866 56003262 56003497 56412067 56412088 56412124 56412208 56412216 56412248 56412284 56412314 56003222 56003223 56003656 56314023 56314327 56314020 56314358 56395755 56397230 56412312 56412313 56412340 56477756
Nut, Hex Jam 5/16-24 Pin, SPR .19 x 1.00 Nut, Hex Nyl Loc-Thin 5/16-24 Ring, Ret Ext Type E .38 Dia. Nut, Wing SS 5/16-24 Connecting Rod Pin Wheel Roller Spring, Extension Spacer, Squeegee Cable Knob, Squeegee Adjust Connecting Rod Pin, Cotter Hair Pin, Cot Hair .148 x Dia .62/1.00 Clevis Pin .375 x 2.25 Squeegee Mount Weld’t. Squeegee Assy (24”) (2400) NOTE 1 Squeegee Assy (26” & 28”) (2600, 2810) (BR 600S, 650S, 600CS, 650CS) NOTE 1 Squeegee Assy (32”) (3210) (BR 700S, 800S, 700CS, 800CS) NOTE 1 Rod End Lift Actuator, Squeegee (M2) NOTE 2 TSBUS2004-864 Rod End, 5/16 Rod End, 5/16 Cable Assembly Rod End
2 1 6 2 1 1 1 1 1 2 4 1 2 2 1 4 1 1 1 1 1 1 2 2 1 1
* = Not Shown NOTE 1: BR 600S & BR 600CS models before SN 1819567 used Squeegee Assy 56314327, after SN use Squeegee Assy 56314020. If replacing squeegee 56314327 with 56314020 on either one of these two models (SN before 1819567) the Squeegee Stop Bracket needs to be set at the “IN” position. See TSBUS2005-891. BR 700S & BR 700CS models before SN1819567 used Squeegee Assy 56314020, after SN use Squeegee Assy 56314358. If replacing squeegee 56314020 with 56314358 on either one of these two models (SN before 1819567) the Squeegee Stop Bracket needs to be set at the “IN” position. See TSBUS2005-891. NOTE 2: From August of 2003 through March 1, 2004 Squeegee Lift Actuator 56314118 was used. All machines built prior to August 2003 and shipped after March 1, 2004 use Actuator 56397230. If you have a machine built between these two dates and are experiencing control panel circuit board or squeegee lift actuator problems you should order Control & Actuator Update Kit, part number 56314710.
FRONT
OUT position
IN position
FORM NO. 56042438
BOOK E E 13.3.1 30
FORM NO. 56042438
STEERING COLUMN ASSEMBLY
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-9
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
03-1
STEERING COLUMN ASSEMBLY
05-2
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56001939 56001958 56002063 56440817 56002086 56002155 56002523 56002840 56002843 56002930 56003179 56003186 56003228 56003268 56003342 56003389 56003403 56009062 56001879 56245008 56302164 56320595 56367095 56412095 56412198 56412281 56420059 56454081 56471148 56497306 56497560 56497308 56497543 56003155 56314048 56314877 56314093 56314094 56314148 56314195 56314295 56314296 56900041 56250414
Wsh, Flt SAE 5/16 Scr, Soc Set Loc 3/8-16 x .50 Wsh, Flt SAE 3/8 Knob Scr, Soc Set Loc 5/16-18 x .25 Scr, Hex Hd 1/4-20 x .75 Scr, Pan Phil Thd Form 8-32 x .38 Nut, Hex Nyl Loc-Thin 1/4-20 Nut, Hex Nyl Loc-Thin 1/2-13 Scr, Soc Set Loc 1/4-20 x .38 Scr, Hex Thd To Hd M8-1.25 x 20mm Scr, Hex Thd To Hd M10-1.50 x 25mm Key, WDF .75 x .19 Ring, Ret Ext Type E Reinf .25 Dia Wsh, Flt .88 x .25 x .13 Nut, Hex Nyl Loc M8-1.25 Nut, Hex Nyl Loc M6-1.00 Scr, Pan Phil Thd Form 1/4-20 x .50 Wsh, Flt SAE 1/2 Spring, Extension Bearing, Flange Bushing .32 x .50 x .28 Collar, Shaft Plaque, Decal Logo Chain, Roller Solution Control Cable Shaft, Upper Steering Universal Joint Sprocket Steering Wheel Wheel Adapter Cup Cap Scr, Hex M6-1.00 x 12mm Lower Column Weldment NOTE 1 TSBUS2005-887 Lower Column Weldment NOTE 2 TSBUS2005-887 Column, Steering Rod, Steering lock Bearing, Nyliner (qty of 1 after serial number chart) TSBUS2005-887 Shaft, Lower Steering Shroud, Lower Column Shroud, Upper Column Plug, Cap Bearing, Flange NOTE 2 TSBUS2005-887
2 2 4 1 2 1 2 2 1 2 2 4 4 2 1 2 1 8 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 2
BOOK E E 13.3.1 31
NOTE 1: Used on machines built before serial number chart. NOTE 2: Used on machines built after serial number chart.
NOTE 1 & 2 SERIAL NUMBER CHART 1797475 - Advenger™ 2400C, 2400D, 2600C, 2600D, 2810D 1797186 - Advenger™ 3210D 1797261 - Advenger™ 2810C 1797187 - Advenger™ 3210C 1796877 - BR 600S 1796885 - BR 700S 1796896 - BR 800S 1796903 - BR 700SC 1796906 - BR 800SC
FORM NO. 56042438
BOOK E E 13.3.1 32
FORM NO. 56042438
OPTIONAL LIGHT KITS
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-9
Item
03-1
OPTIONAL LIGHT KITS
04-9
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
* 1 2 3 4 5 6 7
56314302 56040788 56003119 56001861 56001993 56002768 56416433 56314287 56314288
1 1 1 2 2 2 1 1 1
Warning Beacon Kit Instruction Sheet Pan Phil SS 1/4-20 x .50 Scr, Hex Hd 1/4-20 x .38 Scr, Pan Phil 10-24 x .50 Nut, Hex Nyl Loc 10-24 Strobe Plate Weldment Tube Weldment
* 8 9 10 11
56314313 56040791 56002507 56172230 56409239 56409557
1 1 4 2 1 1
Headlight Kit Instruction Sheet Scr, Pan Phil 1/4-20 x .75 Term .250 Ins Tab Headlight Guard, Headlight
BOOK E E 13.3.1 33
FORM NO. 56042438
BOOK E E 13.3.1 34
FORM NO. 56042438
DUAL VAC MOTOR KIT
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-3
Item * 1 2 3 4 5 6 7 8 9 10 11 12
03-1
DUAL VAC MOTOR KIT
04-3
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56314338 56040792 56314704 56314760 56440213 56314372 56314373 56314377 56314484 56314708 56314535 56397228 56459937 56314761
Dual Vacuum Motor Kit Instruction Sheet Gasket Gasket, Vacuum Duct Clamp, Hose SAE #32 Screen, Filter Filter Plate, Separator (2 Mtr) Mount, Vibration Spacer, Foam Vac Hose Assy. Motor, Vac 36VDC Vac Hose Gasket, Hose
1 1 1 2 1 1 1 1 3 1 1 1 1 1
BOOK E E 13.3.1 35
FORM NO. 56042438
BOOK E E 13.3.1 36
FORM NO. 56042438
SCRUB-N-VAC TOOL KIT
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-3
Item * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
03-1
SCRUB-N-VAC TOOL KIT
04-3
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56314308 56040783 56220035 56314399 56412310 56002124 56402940 56009205 56314402 56314403 56407361 56009030 56314309 56001954 56002674 56219932 56220055 56220074 56262549 56478523 56052338 56155640 56212014 56262560 56314432 56745543 56900035 56900069 56314585 56002768 56001993 56314644
Scrub-N-Vac Kit Instruction Sheet Hose, Assembly Coupler Bushing, Stepped Scr, Pan Phil 10-24 x .62 Bumper, .812 Sq. Washer, Flt. SS .219 x .50 x .047 Wand Assembly Caddy Clamp Scr, Pan Phil Thd Form 10-24 x .38 Pump Assembly (includes items 12-30) Wsh, Flt SAE #10 Scr, Pan Phil 10-24 x 1.00 Clamp, Hose SAE #6 Plug Nipple 1/4 to 1/8 NPT Tee, Barb Tie, Cable Grommet Barb, Adapter 3/8 x 1/4 NPT Pump, 36VDC Hose, Nylon Braid Hose, Spiral .375 x 63.00 Adapter Blk Hd 1/4 Barb, 90 Elbow 27/64 x 3/8 NPT Barb, 90 Elbow 1/2 x 3/8 NPT TVS Assembly Nut, Hex Nyl Loc 10-24 NOTE 1 Scr, Pan Phil 10-24 x .50 NOTE 1 Plate Weldment NOTE 1
1 1 1 1 3 3 2 2 1 1 6 12 1 6 2 6 1 1 1 6 2 1 1 1 1 1 1 1 1 2 2 1
BOOK E E 13.3.1 37
NOTE 1: These parts are included with this kit, but are only required for installation on Adgressor models.
FORM NO. 56042438
BOOK E E 13.3.1 38
FORM NO. 56042438
VACUUM WAND CADDY KIT
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-3
Item * 1 2 3 4 5 6 7 8 9 10
03-1
VACUUM WAND CADDY KIT
04-3
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56412223 56040686 56002124 56412310 56205114 56301339 56329062 56402940 56409563 56412227 56204536 56314399
Vacuum Wand Caddy Kit Instruction Sheet Scr, Pan Phil 10-24 x .62 Spacer, Stepped Squeegee Tool, 14” Coupler Vac Hose, 1.50 Bumper Wand, 2 Piece Caddy Weldment Extension Coupler Coupler
1 1 2 2 1 1 1 2 1 1 1 1
BOOK E E 13.3.1 39
FORM NO. 56042438
BOOK E E 13.3.1 40
FORM NO. 56042438
ON-BOARD CHARGER KIT
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-3
Item * 1 2 3 4 5 6 7 8
03-1
ON-BOARD CHARGER KIT
04-9
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
56314753 56040787 56002768 56002840 56412310 56001993 56002124 56002825 56314750 56314752
Onboard Charger Kit TSBUS2004-872 Instruction Sheet Nut, Hex Nyl Loc 10-24 Nut,Hex Nyl Loc-Thin 1/4-20 Spacer, Stepped Scr,Pan Phil 10-24x.50 Scr,Pan Phil 10-24x.62 Scr,Pan Phil 1/4-20x1.25 Charger, 36v, 25amp TSBUS2004-872 Weldment, Charger
1 1 6 2 3 6 3 2 1 1
BOOK E E 13.3.1 41
FORM NO. 56042438
BOOK E E 13.3.1 42
FORM NO. 56042438
SIDE BROOM KIT
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
04-12
Item * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 * *
03-1
SIDE BROOM KIT
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty 56314306 56040789 56001939 56001993 56002066 56002098 56002119 56002155 56002691 56002701 56002769 56002933 56003312 56003389 56003416 56003418 56009252 56185264 56228052 56324310 56372088 56378534 56314095 56314167 56314174 56314178 56314190 56314194 56314198 56469530 1451899000 56314259 56478246
1 1 6 2 4 4 1 4 1 1 1 4 1 6 6 1 1 3 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1
BOOK E E 13.3.1 43
Description Right Side Broom Kit Instruction Sheet Wsh, Flt SAE 5/16 Scr, Pan Phil 10-24 x .50 Scr, Pan Phil 1/4-20 x .62 Wsh, Flt SAE 1/4 Scr, Soc Set Loc 1/4-20 x .50 Scr, Hex Hd 1/4-20 x .75 Scr, Hex Hd 5/16-18 x 5.50 Nut, Hex Nyl Loc 5/16-18 Nut, Hex Nyl Loc 3/8-16 Scr, Hex Hd Loc 1/4-20 x .38 Nut, Hex Nyl Loc M12-1.75 Nut, Hex Nyl Loc M8-1.25 Scr, Hex M8-1.25 x 30mm Scr, Hex M12-1.75 x 30mm Nut, Wing SS 3/8-16 Bearing, Flange Bushing Nut Plate Switch, Waterproof Knob Brush Holder Weldment Sidebroom Arm Weldment Pivot Weldment Bracket Weldment Bracket, Lift Bar, Lift Rod, Lift Motor Assembly 24V Brush, Sidebroom Harness, Sidebroom Wire Tie
* = Not Shown
FORM NO. 56042438
BOOK E E 13.3.1 44
FORM NO. 56042438
56314474 - KIT, DECK 2400D
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
03-1
56314475 - KIT, DECK 2400C
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 45
FORM NO. 56042438
BOOK E E 13.3.1 46
FORM NO. 56042438
56314476 - KIT, DECK 2600D
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
03-1
56314477 - KIT, DECK 2600C
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 47
FORM NO. 56042438
BOOK E E 13.3.1 48
FORM NO. 56042438
56314478 - KIT, DECK 2810D
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
03-1
56314479 - KIT, DECK 2810C
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 49
FORM NO. 56042438
BOOK E E 13.3.1 50
FORM NO. 56042438
56314480 - KIT, DECK 3210D
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
03-1
56314481 - KIT, DECK 3210C
04-12
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 51
FORM NO. 56042438
BOOK E E 13.3.1 52
FORM NO. 56042438
56316520 - KIT, DECK BR 600S
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
03-1
56316521 - KIT, DECK BR 600SC
05-2
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 53
FORM NO. 56042438
BOOK E E 13.3.1 54
FORM NO. 56042438
56316522 - KIT, DECK BR 700S
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
03-1
56316523 - KIT, DECK BR 700SC
05-2
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 55
FORM NO. 56042438
BOOK E E 13.3.1 56
WIRING DIAGRAM
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
1 AWG
RED
1
F1
RED
2
+
BT1
BLK
-
BATTERY, 36 Vdc
FUSE, 150 A. F2 10 AWG S1
1
F4
ORN
2
FUSE, 1 A.
WHT/GRN
ORN
J4-11 SEAT SW. J4-10 FOR./REV. J4-4 REV.
WHT/BRN
K2
GRA/BLK Amps = .33
2
1
B+
PIN 13 -- POT. LO
A1 SPEED CONTROLLER
J4-8
J3-5
PIN 4 -- POT. WIPER
R1 POT. 5K OHM
B- 4 B- 3 B- 2 B- 1 J2-5
3
PIN 8 -- SLOW/FAST
I -- BRUSH
I -- VAC
VIO
J4-3
PIN 18 -- SPEED LIMIT PIN 3 -- POT. HI
VIO GRA YEL
YEL
J4-9
16 AWG
BLK
B-
BLK
M2
RED/GRN
M1
YEL/BLK
M3 +
M
Amps = 23
MOTOR WHEEL DRIVE
BRN/WHT
VIO/BLK 2 Amps = .31
1
VALVE, SOLENOID
POT. HIGH
J3-6
L1 WHT/BRN
POT. LO
J4-6
ACC
J4-12
J2-8
BLK
S P E E D L I MI T J2-9
E1 CONTROL BOARD
BRN/RED YEL/VIO
16 AWG WHT/BRN
INTERFACE HORN J2-3 SOLUTION J2-2 VACUUM BRUSH J2-1 SPEED LIMIT J4-2
J4-7
WHT/RED BRN/WHT
GRN/BLK
PIN 6 -- BRAKE
HORN +
Amps = .1
PIN5 -- KSI
BLU/BLK PIN 16 - REV. ALARM
J3-2
J4-5
RED/BLK
THERMISTOR J4-1
ORN
2
ORN/BLU
STATUS
J3-3
J3-4
BLK/YEL
ORN/BLK
RED/WHT
1
SW, SEAT
M2 SQUEEGEE LIFT ACTUATOR M Amps = 2
M1 BRUSH LIFT ACTUATOR M Amps = 3
BRN J2-6
J2-7
22 AWG ORN/RED
2
B+ 1
B+ 2
HORN-BACKUP ALARM H1 1
S2 BRN
SW SPST KEY
BRN/YEL
RED
BRN/BLK
PIN9 -- STATUS
2
J3-1
1
CIRCUIT BREAKER, 45 AMP F3 16 AWG 1 2 BRN/YEL CIRCUIT BREAKER, 10 AMP
KEY SW. J2-10
RED
18 AWG
CONTACTOR, VACUUM K1 WHT/RED WHT/BRN
18 AWG
Amps = .33
CONTACTOR , BRUSH
OPTIONAL
NOTE: PRESSURE SWITCH ON PART OF PUMP ASSEMBLY WHT/BRN NOTE: SWITCH IS PART OF LAMP ASSEMBLY
M4
S3 1
+
2
PUMP, ACCESSORY S4
WHT/BRN
BLK
- Amps = 3
M
1
H2 BLK
2 Amps = 1.67
1
2
LAMP, HEAD H3 BLK BRN/RED
2 Amps = .3
1
LAMP, FLASHING 1
K2
8 AWG
2
WHT
1
WHT
CONTACT N.O.
MOTOR, VAC Amps = 18 1
2
M6 M
OPTIONAL
MOTOR, VAC Amps = 18
K1 1
8 AWG
2
BLU BLU
CONTACT N.O.
+
M7 M
-
M8 Amps = 22 M +
BLK
Amps = 22 MOTOR, BRUSH
BLK
RED
BLK
2
M5 M
BLK
RED
YEL/VIO
WHT/BRN
MOTOR, BRUSH
F5 BLU
1
2
FUSE, 5 AMP
FORM NO. 56042438
RED
RED 2 1 SW, SIDE BROOM OPTIONAL -- ON CYLINDRICAL MACHINE ONLY 16 AWG
M9
S5
+
M
Amps = 8.8 -
MOTOR, SIDE BROOM
BLK
Item
03-1
WIRING DIAGRAM
05-2
Advenger™ / BR 600S, 650S, 700S, 800S
Ref. No. Qty
Description
A1
56314067
Controller
BT1
N/A
E1
56314072
1
Control Panel Assembly
F1 F2 F3 F4 F5
56412089 56364294 56387316 N/A
1 1 1 1 1
Fuse, 150 Amp Circuit Breaker, 45 Amp (Wheel Drive) Circuit Breaker, 10 Amp (Control Circuit) Fuse, 1 Amp Fuse, 5 Amp (Side Broom / optional)
H1 H2 H3
56412177 56314063 56416433
1 1 1
Horn / Backup Alarm Headlight (optional) Strobe Light (optional)
K1 K2
56395450 56395450
1 1
Contactor, Brush Motor Contactor, Vac Motor
L1
56397215
1
Solenoid Valve
M1 * * * M2 M3 * * *
56393303 56470433 56393790 56388520 56397230 56314268 56314282 56314289 56412320
1 1 2 1 1 1 1 1 1
* * * * * ** M4 M5 * M6 *
56412321 56412322 56412323 56412325 56314269 56412339 56212014 56397228 56212223 56397228 56212223
1 1 1 1 1 1 1 1 1 1 1
Lift Actuator, Brush Carbon Brush Kit Limit Switch Plastic Nut Lift Actuator, Squeegee TSBUS2004-864 Motor, Drive Wheel TSBUS2004-869 Brake Bar Brake Band Carbon Brush Cover Kit (contains 4 seal rings & 4 brush covers) Sealing Ring Bearing, Ball, Gearbox Side Bearing, Ball, Brush Side Carbon Brush Kit Drive Wheel – P7 Scrubber Compound Drive Wheel – Polyurethane Motor, Pump (optional) Motor, Vac 36VDC Carbon Brush Set Motor, Vac 36VDC (optional) Carbon Brush Set
1
Item
BOOK E E 13.3.1 57 Ref. No. Qty
Description
56314139 56314140 56314141 56314335 56314359 56314499 56314560 56314580 56314581 56314582 56314583 56314584 56407431
1 1 1 1 2 2 2 1 1 1 4 1 1
* * * * * M8
56417489 56407490 56407492 56407493 56407494 56407431
1 1 1 4 4 1
* * * * * M9
56417489 56407490 56407492 56407493 56407494
1 1 1 4 4 1
Motor Gearbox Assy (24” / Disk) Motor Gearbox Assy (26” / Disk) Motor Gearbox Assy (28” / Disk) Motor Gearbox Assy (32” / Disk) Key, 6mm Square Cover, Gearbox Gearbox Bearing (Fan End) Bearing (Brush End) Brush Ring Carbon Brush Safety Hook Motor, 36VDC, .75HP (Cylindrical) TSBUS2004-868 Armature (for 56407431) Bearing (for 56407431) Brush Cap Assy (for 56407431) Carbon Brush Assy (for 56407431) Brush Cover Cap (for 56407431) Motor, 36VDC, .75HP (Cylindrical) TSBUS2004-868 Armature (for 56407431) Bearing (for 56407431) Brush Cap Assy (for 56407431) Carbon Brush Assy (for 56407431) Brush Cover Cap (for 56407431) Motor, Side Broom (optional)
R1
56454740
1
Potentiometer, 5K
S1 * S2 S3 S4 S5
56396188 56396189 56409613 N/A N/A
1 1 1 1 1 1
Switch, Key Key, Spare Switch, Seat Switch, Pump (part of M4) Switch, Headlight (part of H2) Switch, Side Broom (optional)
M7
Battery * * * * * * * *
* = Not Shown ** = Optional
FORM NO. 56042438
BOOK E E 13.3.1 58
BRUSH SELECTOR GUIDE-DISK
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. Union Mix: ProLite: Prolene: Magna Grit: Dyna Grit: MidLite Grit: MidGrit: AgLite Grit:
Medium grade natural fibers for polishing finished floors with standard-speed equipment. Recommended for use in place of white pads. Bristles are made from light-duty polypropylene for general scrubbing when you do not want to scratch or remove finish from the floor. Recommended for use in place of red pads. Polypropylene material for medium-duty scrubbing on concrete, terrazzo and vinyl floor tile. Recommended for use in place of green or blue pads. For extreme heavy-duty scrubbing or stripping of floors. This brush has extra large diameter silicon carbide grit impregnated synthetic bristles. Recommended for use in place of black pads. For aggresive, heavy-duty scrubbing or stripping of floors. Recommended for use in place of brown pads. For general purpose scrubbing of sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. For general purpose scrubbing when you need a lighter action for sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. For light scrubbing when used wet; buffing or polishing when used dry on urethane coated, sealed concrete or other resilient hard surface floors. Recommended for use in place of red or white pads.
Short Trim
28” BRUSHES 56505800 - Short Trim Pad Holder 56505801 - Magna Grit 56505802 - Dyna Grit 56505803 - AgLite Grit 56505804 - ProLite 56505805 - Prolene 56505806 - Union Mix 56505807 - MidGrit 56505808 - MidLite Grit 32” BRUSHES 56505830 - Short Trim Pad Holder 56505831 - Magna Grit 56505832 - Dyna Grit 56505833 - AgLite Grit 56505834 - ProLite 56505835 - Prolene 56505836 - Union Mix 56505837 - MidGrit 56505838 - MidLite Grit
24” BRUSHES 56505750 - Short Trim Pad Holder 56505751 - Magna Grit 56505752 - Dyna Grit 56505753 - AgLite Grit 56505754 - ProLite 56505755 - Prolene 56505756 - Union Mix 56505757 - MidGrit 56505758 - MidLite Grit 26” BRUSHES 56505760 - Short Trim Pad Holder 56505761 - Magna Grit 56505762 - Dyna Grit 56505763 - AgLite Grit 56505764 - ProLite 56505765 - Prolene 56505766 - Union Mix 56505767 - MidGrit 56505768 - MidLite Grit
DISC BRUSH APPLICATION GUIDE (SUGGESTION ONLY) Application Stripping: Concrete Terrazzo Ceramic/Quarry tile Vinyl tile General Scrubbing: Concrete Terrazzo Ceramic/Quarry tile Marble Vinyl tile Raised-rubber tile Polishing: Raised Disc Tile Marble Vinyl tile
FORM NO. 56042438
46 Grit
80 Grit
X X
X X X X
X
X
180 Grit
240 Grit
X X X
X X X
X
500 Grit
X X X X X
Prolene
Prolite
Union Mix
X X X X X X X X X
03-1
BRUSH SELECTOR GUIDE-CYLINDRICAL
05-2
Advenger™ / BR 600S, 650S, 700S, 800S
BOOK E E 13.3.1 59
We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. 46 Grit Brush:
Most aggressive grit brush. Used primarily to clean heavy buildup on concrete floors in factories, or for heavy stripping of finish.
80 Grit Brush:
Medium aggressive grit brush. Good all-around brush for medium to heavy buildup removal. Can also be used for general stripping operations.
180 Grit Brush:
Least aggressive grit brush. Used for daily cleaning of hard-finished floors.
Polypropylene Brush:
Standard equipment brush. Low cost, yet effective in cleaning many common floor surfaces.
Stiff Nylon Brush:
Cleaning action similar to polypropylene. More durable and wear-resistant than polypropylene.
Soft Nylon Brush:
Least aggressive brush available. Used on soft-finish floors where a more aggressive brush would leave scratch marks, or in applications requiring very light cleaning.
24” BRUSHES 56314389 - Soft Nylon 56314390 - Hard Nylon 56314391 - Prolene 56314392 - 180 Grit 56314393 - 80 Grit 56314394 - 46 Grit
28” BRUSHES 56412191 - Soft Nylon 56412192 - Hard Nylon 56412046 - Prolene 56412193 - 180 Grit 56412194 - 80 Grit 56412195 - 46 Grit
26” BRUSHES 56314383 - Soft Nylon 56314384 - Hard Nylon 56314385 - Prolene 56314386 - 180 Grit 56314387 - 80 Grit 56314388 - 46 Grit
32” BRUSHES 56407473 - Soft Nylon 56407474 - Hard Nylon 56407475 - Prolene 56407476 - 180 Grit 56407477 - 80 Grit 56407478 - 46 Grit
CYLINDRICAL BRUSH APPLICATION GUIDE (SUGGESTION ONLY) Application Stripping: Concrete Terrazzo Ceramic/Quarry tile Vinyl tile General Scrubbing: Concrete Terrazzo Ceramic/Quarry tile Marble Vinyl tile Raised-rubber tile
46 Grit
80 Grit
X X
X X X X
X
X
180 Grit
Polypropylene
Stiff Nylon
X X X X X X
X X X
X X X X X
X
Soft Nylon
X X X X X
FORM NO. 56042438
BOOK E E 13.3.1 60 Item
OPTIONAL KITS AND ACCESSORIES
03-1
Advenger™ / BR 600S, 650S, 700S, 800S
05-2
Ref. No. Qty
Description
** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
56314753 56314301 56314302 56314306 56314308 56314312 56314313 56314338 56397453 56314474 56314475 56314476 56314477 56314478 56314479 56314480 56314481 56316520 56316521 56316522 56316523
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Optional Kits Kit, On-Board Charger TSBUS2004-872 Kit, Seat Armrests Kit, Warning Beacon Kit, Right Side Broom Kit, Scrub-N-Vac Tool W/Pump Kit, Seatbelt Kit, Headlight Kit, Dual Vac Motor Kit, Battery Fill Indicator Kit, Deck 2400D Kit, Deck 2400C Kit, Deck 2600D Kit, Deck 2600C Kit, Deck 2810D Kit, Deck 2810C Kit, Deck 3210D Kit, Deck 3210C Kit, Deck BR 600S Kit, Deck BR 600SC Kit, Deck BR 700S Kit, Deck BR 700SC
** ** **
56314054 56314055 56314056
1 1 1
** ** **
56314303 56314304 56314305
1 1 1
** ** **
56314060 56314061 56314062
1 1 1
** ** **
56314124 56314170 56314395
1 1 1
** ** **
56314125 56314171 56314396
1 1 1
** ** **
56314126 56314172 56314397
1 1 1
** ** **
56314127 56314173 56314398
1 1 1
** **
56314911 56314915
1 1
** **
56314912 56314916
1 1
** **
56314913 56314917
1 1
** **
56314914 56314918
1 1
Item
Ref. No. Qty
Description
** **
56391391 56206079
6 6
Optional Batteries Battery, 6V, 305A/H Battery, 6V, 235A/H
** ** ** ** **
56395101 56388502 56388120 56372190 56388119
A/R A/R A/R A/R A/R
Optional Battery Chargers Battery Charger, 36VDC, Auto, 20Amp, 120VAC/60HZ Battery Charger, 36VDC, Auto, 25Amp, 120VAC/60HZ Battery Charger, 36VDC, Auto, 36Amp, 120VAC/60HZ Battery Charger, 36VDC, 20Amp, 230VAC/50HZ Battery Charger, 36VDC, 36Amp, 230VAC/50HZ
** **
56409441 56409823
A/R A/R
Accessories Programmer, 1311 User Programmer Cable
** = Optional, Not Included
24” Squeegee Blade Kits Kit, Standard Squeegee Blade NOTE #1 Kit, Linatex Squeegee Blade NOTE #1 Kit, Neoprene Squeegee Blade NOTE #1 26” & 28” Squeegee Blade Kits Kit, Standard Squeegee Blade NOTE #1 Kit, Linatex Squeegee Blade NOTE #1 Kit, Neoprene Squeegee Blade NOTE #1 32” Squeegee Blade Kits Kit, Standard Squeegee Blade NOTE #1 Kit, Linatex Squeegee Blade NOTE #1 Kit, Neoprene Squeegee Blade NOTE #1 24” Disk Deck Blade Kits (Before TSBUS2004-884) Kit, Gum Rubber 24 Disk NOTE #2 Kit, Neoprene 24 Disk NOTE #2 Kit, Linatex 24 Disk NOTE #2 26” Disk Deck Blade Kits (Before TSBUS2004-884) Kit, Gum Rubber 26 Disk NOTE #2 Kit, Neoprene 26 Disk NOTE #2 Kit, Linatex 26 Disk NOTE #2 28” Disk Deck Blade Kits (Before TSBUS2004-884) Kit, Gum Rubber 28 Disk NOTE #2 Kit, Neoprene 28 Disk NOTE #2 Kit, Linatex 28 Disk NOTE #2 32” Disk Deck Blade Kits (Before TSBUS2004-884) Kit, Gum Rubber 32 Disk NOTE #2 Kit, Neoprene 32 Disk NOTE #2 Kit, Linatex 32 Disk NOTE #2 24” Disk Deck Blade Kits (After TSBUS2004-884) Kit, Gum Rubber 24 Disk NOTE 2 Kit, Linatex 24 Disk NOTE 2 26” Disk Deck Blade Kits (After TSBUS2004-884) Kit, Gum Rubber 26 Disk NOTE 2 Kit, Linatex 26 Disk NOTE 2 28” Disk Deck Blade Kits (After TSBUS2004-884) Kit, Gum Rubber 28 Disk NOTE 2 Kit, Linatex 28 Disk NOTE 2 32” Disk Deck Blade Kits (After TSBUS2004-884) Kit, Gum Rubber 32 Disk NOTE 2 Kit, Linatex 32 Disk NOTE 2
NOTE #1: All squeegee blade kits include both front and rear squeegee blades. NOTE #2: Disk Deck Blade Kits include required mounting fasteners (Rivet, Nylon Tree Push-In 56003263) and both deck and skirt assembly blades.
FORM NO. 56042438
Austria (Sales Sub) Nilfisk-Advance GmbH Voralberger Allee 46 A-1230 Wien [email protected] www.nilfisk-advance.at Belgium (Sales Sub) Nilfisk-Advance NV/SA Doornveld Sphere Business Park Industrie Asse 3, No. 11 B-1731 Zellik-Asse www.nilfisk-advance.be Czech Republic (Sales Sub) Nilfisk-Advance s.r.o. Lysinská 44/1863 143 00 Praha - Modrany Czech Republic
Denmark Nilfisk-Advance A/S Sognevej 25 DK-2605 Brøndby [email protected] www.nilfisk-advance.com Denmark (Prod. Sub) Gerni A/S Myntevej 2 DK-8900 Randers www.gerni.com Denmark (Sales Sub) Nilfisk-Advance Nordic A/S Sognevej 25A Postbox 344 DK-2605 Brøndby [email protected] www.nilfisk-advance.dk France (Sales Sub) Nilfisk-Advance S.A. 27 avenue de la Baltique Villebon sur Yvette P.B. 246 F-91944 Courtaboeuf Cedex [email protected] www.nilfisk-advance.fr Germany (Sales Sub) Nilfisk-Advance AG Siemensstrasse 25-27 Postfach 1361 D-25462 Rellingen [email protected] www.nilfisk-advance.de Greece (Sales Sub) Nilfisk-Advance A.E. 8, Thoukididou Str. Argioupoli Gr - 164 52 Athens Greece
Phone: +43 1616 58 30 22 Fax: +43 1616 58 30 40
Phone: +32 (0)2467 60 50 Fax: +32 (0)2463 44 16
Phone: +420 2 44 09 09 12 +420 2 44 09 09 21 4 Fax: +420 2 44 40 23 93 Phone: +45 43 23 81 00 Fax: +45 43 43 77 00
Phone: +45 89 12 22 00 Fax: +45 86 43 14 81 Phone: +45 43 23 40 50 Fax: +45 43 23 40 60
Phone: +33 1695 98 700 Fax: +33 1695 98 701
Phone: +49 4101 3990 Fax: +49 4101 39 91 91
Tel.: +30 210 963 3443 Fax: +30 210 965 0975
Holland (Sales Sub) Nilfisk-Advance B.V. Camerastraat 9 (2e verdieping) 1322 BB Almere Postbus 60112 1320 AC Almere www.nilfisk-advance.nl Ireland (Sales Sub) Nilfisk-Advance Limited 28 Sandyford Office Park Sandyford, Dublin 18 Ireland Italy (Prod & Sales Sub) CFM SpA Nilfisk-Advance Div. Guardamiglio Localita Novella III I-26862 Guardamiglio (Mi) Italy (Prod & Sales Sub) CFM S.p.A. Via Porrettana 1991 I-41059 Zocca (Modena) [email protected] Norway (Sales Sub) Nilfisk-Advance AS Ulvenveien 89C N-0581 Oslo Poland (Sales Sub) Nilfisk-Advance Sp.Z.O.O. 05-800 Pruszków ul. 3-go MAJA 8 Poland Portugal (Sales Sub) Nilfisk-Advance, Lda. Sintra Business Park Zona Industrial Da Abrunheira Edificio 1, 1o A P-2710-089 Sintra Russia (Sales Sub) Nilfisk-Advance LLC Vyatskaya str. 27, bld. 7 127015 Moscow Russia Spain (Sales Sub) Nilfisk-Advance S.A. Torre D’Ara Passeig del Rengle, 5 Pl.10 E-08302 Mataró (Barcelona) [email protected] Sweden (Sales Sub) Nilfisk -Advance A/S Sjöbjörnsvägen 5 Box 44045 S-100 73 Stockholm [email protected] www.nilfisk-advance.se
Phone: +31 36 546 07 00 Fax: +31 36 523 51 48
Phone: +35 3 12 94 38 38 Fax: +35 3 12 94 38 45 Phone: +39 0377 /414021 /45 1124 Fax: +39 0377 51 443 Phone: +39 059 973 0000 Fax: +39 059 973 0099 Phone: +47 23 06 75 00 Fax: +47 23 06 75 01 Phone: +48 22 738 37 50 Fax: +48 22 738 37 51 Phone: +35 121 911 2670 Fax: +35 121 911 2679
Phone: 7 095 783 9602 Fax: +7 095 783 9603 Phone: +34 93 741 2400 Fax: +34 93 757 8020
Phone: +46 8555 94400 Fax: +46 8555 94430
Sweden (Prod.) Nilfisk-Advance A/S Åmål Branch Strömsbergsgatan Box 127 S-662 23 Åmål Switzerland (Sales Sub) Nilfisk-Advance AG Ringsstrasse 19 Kirchberg/Industrie Stelzl CH-9500 Wil www.nilfisk-advance.ch UK (Sales Sub) Nilfisk-Advance Limited Newmarket Road Bury St. Edmunds UK-Suffolk IP33 3SR USA (Prod.) Nilfisk-Advance Inc. 14600 21.st Avenue North Plymouth, MN 55447-3408 www.mn.nilfisk-advance.com USA (Sales Sub) Nilfisk-Advance America Inc. 300 Technology Drive Malvern, PA 19355 www.pa.nilfisk-advance.com Canada (Sales Sub) Nilfisk-Advance Canada Comp. 396 Watline Avenue Mississauga, Ontario L4Z 1X2 Australia (Sales Sub) Nilfisk-Advance Pty. Ltd. 48 Egerton Street Silverwater, NSW 2128 Postal addresse: PO Box 6046 Silverwater. NSW 1811 [email protected] www.nilfisk-advance.com.au China (Shenzhen) Nilfisk-Advance (Shenzhen) Ltd Blok 3, Unit 130, 1001 Honghua Road Int. Commercial & Trade Center Fuitian Free Trade Zone 518038 Shenzhen P.R. China China (Suzhou) Nilfisk-Advance Professional Cleaning Equipment (Suzhou) Co. Ltd. 306 Su Hong Zhong Road, Build. 2 Suzhou Industrial Park 215021 Suzhou P.R. China
Phone: +46 5321 7500 Fax: +46 5321 7595
Phone: +41 71 92 38 444 Fax: +41 71 92 35 283
Phone: +44 1284 763163 Fax: +44 1284 750 562 Phone: +1 763 745 3500 Fax: +1 763 745 3718 Phone: +1 610 647 6420 Fax: +1 610 647 6427 Phone: + 1 905 712 3260 Fax: +1 905 712 3255 Phone: +61(0)2 9648 2700 Fax: +61(0)2 9648 2711
Phone: +86 755 8359 7937 el. 8359 7939-42 Fax: +86 755 8359 1063
Phone: +86 512 8918 5656 Fax: +86 512 8918 5666
Hong Kong (Sales Sub) Nilfisk-Advance Ltd. 2001 HK Worsted Mills Ind’l Bldg., 31-39 Wo Tong Tsui St. Kwai Chung, Hong Kong Japan (Sales Sub) Nilfisk-Advance Inc. 3-17-40-101 Chigasaki Higashi Tsuzuki-ku, Yokohama 224-0033 Japan Malaysia (Sales Sub) Nilfisk-Advance Sdn Bhd No. 21, Jalan SS 25/41 Mayang Industrial Park 47301 Petaling Jaya Selangor, Malaysia New Zealand (Sales Sub) Nilfisk-Advance Limited Danish House 6 Rockridge Avenue Penrose 92-829 Auckland1135 Postal addresse: Private Bag 92 825 Auckland New Zealand Singapore (Sales Sub) Nilfisk-Advance Pte. Ltd. 22,Woodlands Industrial Park E1 Singapore 757740 [email protected] Taiwan, ROC (Sales Sub) Nilfisk-Advance Ltd. Taiwan Branch (H.K.) 1F, No. 193, Sec.2 Xing Long Rd., Taipei Taiwan, R.O.C. Thailand (Sales Sub) Nilfisk-Advance Co. Ltd. 89 Soi Chokechai-Ruammitr Viphavadee-Rangsit Road Ladyao, Jatuchak, Bangkok 10900 Thailand
Phone: +852 2427 5951 Fax: +852 2487 5828 Phone: +8145 942 7741 Fax: +8145 942 6545 Phone: +60 3 7956 8188 Fax: +60 3 7966 6828
Phone: +64(0)9 525 0092 Fax: +64(0)9 525 6440
Phone: + 65 6 7599100 Fax: +65 7599133 Phone: +886 2 2239 8812 Fax: +886 2 2239 8832
Phone: +66 2 275-5630 Fax: +66 2 691-4079
www.nilfisk-advance.com
© 2005 Printed in USA